Shield Water Co.
Services/Water Testing & Analysis

Water Testing & Analysis in Dallas-Fort Worth

We test your water for hardness, chlorine, iron, pH, and other key contaminants. You will get a clear picture of exactly what is in your water and an honest recommendation for what, if anything, to do about it.

What We Measure

What We Test Your Water For

Each parameter tells us something specific about your water and what, if anything, needs to be addressed.

Hardness

Measured in grains per gallon. DFW water typically runs 15 to 25 gpg. Knowing your exact hardness lets us size the right softener for your home.

Chlorine & Chloramines

DFW municipalities use chlorine and chloramines to disinfect water. Both cause taste and odor issues and can dry out skin and hair.

Iron & Manganese

Common in both city and well water in DFW. Iron causes orange staining on fixtures and laundry. Manganese causes black or dark brown staining.

pH

Water that is too acidic or too alkaline can affect taste, corrode pipes, and reduce the effectiveness of water treatment equipment.

Total Dissolved Solids

TDS measures the total concentration of dissolved substances in your water. High TDS can indicate mineral content, salts, or other compounds.

Hydrogen Sulfide

The cause of rotten egg odor in well water. Even small concentrations are noticeable and require a specific treatment approach.

Shield Water Co. technician performing water testing and analysis for a DFW homeowner.
Why Test First

Know What You Are Treating Before You Treat It

Every water treatment recommendation we make is based on what your water test actually shows. The difference between a $1,200 system and a $4,000 system often comes down to knowing exactly what you are dealing with.

A water test protects you from buying equipment you do not need and ensures the equipment you do buy is correctly sized and configured for your specific water chemistry. It is the first step of every installation we do.

After the test, we walk you through every result in plain English. No jargon, no scare tactics. Just a clear picture of your water and honest guidance on what to do next.

FAQ

Common Questions

A standard on-site water test takes 15 to 30 minutes. We test for the most common DFW water quality issues and walk you through the results on the spot. For comprehensive laboratory testing, results typically come back within 5 to 7 business days.

Coverage

Water Testing Across DFW

Our specialists are local to the Metroplex and available across all of DFW.

Don't see your city? Call us, we likely serve your area. We cover all of Tarrant, Dallas, Collin, and Denton counties.